EasyManua.ls Logo

Siegenia Drive Series - User Manual

Siegenia Drive Series
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DRIVE
Motorised Sliding System.
MSA400 smart
Window systems
Door systems
Comfort systems
INSTALLATION AND
OPERATING INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the Siegenia Drive Series and is the answer not in the manual?

Summary

General Information

Target Group of Documentation

Identifies the intended audience for this manual.

Intended Use

Specifies the correct application and purpose of the MSA400 smart system.

Incorrect Use

Details prohibited uses and associated liability warnings.

Dimensions

Details dimensional information relevant to system installation and use.

Safety Notes

General Safety Warnings

Outlines critical safety precautions for operation and installation.

Device Functions

General Product Description

Overview of the MSA400 smart system's capabilities.

Control Options

Details various methods for controlling the sliding system.

Safety Cut-off and Jam Protection

Explains the system's safety mechanisms against obstructions.

LED Indicator Functionality

Describes the meaning of LED light indicators on the drive.

Size Range

Scope of Delivery

On-site Risk and Hazard Analysis

Risk and Hazard Analysis Process

Details the procedure for assessing risks during planning.

Assembly and Installation Instructions

Provides guidelines for safe assembly and installation.

Trade Cooperation and Interfaces

Addresses coordination between different trades and interfaces.

Installation

Installation Requirements

Lists prerequisites for installing the MSA400 smart system.

External Push Buttons and Locking Motor Connection

Explains how to connect optional external components.

Mains Cable Running Information

Details methods for routing the mains power cable.

Drill Holes on Sliding Sash

Specifies procedures for drilling holes for accessories on the sash.

Slide Drive SA Assembly

Guides the assembly and horizontal positioning of the slide drive.

Vertical Positioning and Fixing of Slide Drive SA

Instructs on the vertical mounting of the slide drive SA.

Concealed Mains Cable Routing and Connection

Describes the process for a concealed mains cable connection.

Surface-mounted Mains Cable Running

Details the procedure for surface-mounting the mains cable.

Concealed Mains Cable Running and Connection

Explains the procedure for concealed mains cable connection.

Installing the Light Curtain

Explains the installation of an optional light curtain accessory.

Commissioning

General Commissioning Information

Provides an overview of the commissioning process.

Reference Run Procedure

Step-by-step guide for performing the initial reference run.

Calibration and Teach-in Run

Detailed instructions for system calibration and learning.

Operation

Opening the Sliding Sash

How to open the sliding sash using the operator button.

Stopping the Sliding Sash

How to stop the sash movement during operation.

Opening to Intermediate Position

How to move the sash to a programmed intermediate stop.

Closing and Locking the Sliding Sash

Procedure for closing and locking the sash (optional feature).

Programming Special Functions

Teaching-in the Intermediate Position

Instructions for programming a custom intermediate sash position.

Resetting the Sash Position (Reference Run)

How to perform a reference run to reset sash parameters.

Care and Maintenance

Cleaning Procedures

Guidelines for cleaning the MSA400 smart system.

Rectification of Malfunctions

MSA400 Smart Troubleshooting

Common problems and their solutions for the MSA400 smart.

SIEGENIA Comfort App Issues

Troubleshooting specific to the SIEGENIA Comfort app.

Technical Specifications

Accessories

Information Concerning Product Liability

Product Use and Liability

Details warranty terms and product liability conditions.

Disclaimer of Liability

Outlines limitations of liability for product use.

Environmental Protection

Discusses environmental considerations and product disposal.

EC Declaration of Incorporation

Siegenia Drive Series Specifications

General IconGeneral
BrandSiegenia
ModelDrive Series
CategoryGarage Door Opener
LanguageEnglish