Need help?Do you have a question about the Siegenia PORTAL HS and is the answer not in the manual?
Identifies the intended users for the documentation.
Refers to directives for hardware operation and maintenance.
Lists documents required for customer information and obligations.
Defines the specific purpose and limitations of the PORTAL HS hardware.
Lists actions that constitute misuse of the hardware.
Provides critical safety precautions for hardware usage and environment.
Explains how to operate the lift and slide mechanism.
Defines symbols used in the manual for tools and actions.
Refers to construction drawings for hole positioning and component placement.
Points to specific application diagrams for the system.
Provides guidance on sealing and installing the threshold.
Details size ranges for frame width, height, and sash dimensions.
Illustrates different scheme versions (A and C) for the product.
Illustrates the hardware components for Scheme A.
Lists all basic hardware components for schemes A and C.
Details the milling process for bogie wheels.
Explains how to insert the distance piece into the profile.
Describes the installation of the corner drive.
Details the installation process for bogie wheels.
Covers milling and drilling procedures for the gear assembly.
Instructions for installing locking parts and buffer.
Steps for inserting the SOFT CLOSE sliding sash.
Instructions for correctly fixing the stop component.
Outlines special features and positioning for scheme C.
Lists and illustrates hardware components for RC2 burglar resistance.
Lists and illustrates hardware components for RC3 burglar resistance.
Detailed list of hardware components for RC2 and RC3.
Outlines necessary preparation steps before installation.
Specific steps for installing RC2 components.
Specific steps for installing RC3 components.
Guides on positioning raised countersunk head screws.
Instructions for fixing the locking part G.
Illustrates the hardware components for the hook bolt gear.
Detailed list of hardware components for the hook bolt gear.
Provides instructions for frame milling for the hook bolt gear.
Details the steps for fixing the locking piece.
Explains locking and night vent adjustments.
Guides on adjusting the compression of the locking piece.
Illustrates the hardware components for the barrier-free system.
Details the installation of stops for barrier-free systems.
Hardware for sashes up to 400kg, threshold with rail 6.5/13.
Hardware for sashes up to 400kg, threshold with rail 6.5/5.
Lists hardware components for the ECO PASS threshold.
Provides a detailed list of hardware for the ECO PASS threshold.
Describes the installation of sealing wedges for the threshold.
Describes the installation of the frame corner connector.
Instructions for clipping and adjusting the running rail.
Instructions for mounting and gluing the flat threshold.
Details the fixing sequence for threshold accessories.
Provides information on base profile height and lining.
Illustrates the hardware components for the SOFT CLOSE system.
Explains the correct positioning of the trigger for SOFT CLOSE.
Steps for inserting the SOFT CLOSE mechanism into the sash.
Instructions on how to tension the SOFT CLOSE mechanism.
Lists components for Si-line handle cartons.
Lists components for pop-up handles.
Guides on correctly fixing the sill installation with weather bar or threshold.
Details the sealing requirements for the reveal connection.
Refers to SI construction drawings for profile details.
Describes jigs for frame corner connection.
Describes jig for gear drills.
Describes template for milling sliding grip.
Provides guidance on cleaning PVC surfaces and prohibited agents.
General| Brand | Siegenia |
|---|---|
| Model | PORTAL HS |
| Category | Intercom System |
| Language | English |
To Next Page