Need help?Do you have a question about the Siel SOLEIL 3F-TL10K and is the answer not in the manual?
General| Model | SOLEIL 3F-TL10K |
|---|---|
| Category | Inverter |
| Output Power | 10kW |
| Frequency | 50/60Hz |
| Cooling Method | Forced Air Cooling |
| Output Voltage | 380V |
| Protection Features | Over Temperature |
| Humidity | 5% to 95% (non-condensing) |
Warnings about AC/DC sources, PV module light exposure, leakage current, and multiple sources.
Electrical charge remains in DC link capacitors after disconnection.
Lists circumstances like broken seal, misuse, improper transport, wrong conditions, unauthorized modifications, etc.
Lists features like RoHS compliance, high efficiency, IP65 enclosure, display, communication interface, and RCMU.
Details mounting, AC output cable connection, and AC junction unit connection.
Covers PV module connection checks and post-installation verification steps.
Explains active power reduction and frequency-dependent active power reduction.
Discusses reactive power control for grid voltage stabilization and different modes.
Details the menu for configuring reactive power functions and voltage/frequency parameters.
Troubleshooting for system, grid voltage, frequency, and utility connection issues.
Addresses internal inverter issues and DC bus or sensor related faults.
Detailed electrical parameters for DC input and AC output for all models.
To Next Page
