To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6AV6647-0AG11-3AX0 and is the answer not in the manual?
General| Order Number | 6AV6647-0AG11-3AX0 |
|---|---|
| Display Type | TFT LCD |
| Brightness | 300 cd/m² |
| Operating Voltage | 24 V DC |
| Installation type | Panel Mount |
| Operating system | Windows CE |
| Touch Screen | Yes, analog resistive |
| Interfaces | Ethernet, USB |
| Protection Class | IP65 |
| Operating Temperature | 0 to 50 °C |
| Certifications | cULus |
| Configuration software | WinCC |
| Memory | 512 MB |
Explains the purpose and scope of the operating instructions based on IEC 62079.
Defines the scope of the operating instructions for SIMATIC HMI Basic Panels and naming conventions.
Lists the prerequisite knowledge for understanding the operating instructions.
Introduces the SIMATIC HMI Basic Panels, focusing on their cost-effectiveness and features.
Details the design and components of the KP300 Basic mono PN HMI device.
Details the design and components of the KP400 Basic color PN HMI device.
Details the design and components of the KTP400 Basic mono PN HMI device.
Details the design and components of the KTP400 Basic color PN HMI device.
Details the design and components of the KTP600 Basic mono/color PN HMI device.
Details the design and components of the KTP600 Basic color DP HMI device.
Details the design and components of the KTP1000 Basic color PN HMI device.
Details the design and components of the KTP1000 Basic color DP HMI device.
Details the design and components of the TP1500 Basic color PN HMI device.
Lists the components included in the HMI device product package.
Lists available accessories for the HMI devices, including converters and connectors.
Provides an overview of the tasks required for commissioning the HMI device.
Covers safety precautions related to working on control cabinets and installation.
Provides information on IT security mechanisms and recommendations for safe operation.
Details important notes on usage, including approvals for industrial applications and residential areas.
Outlines preparations before installing the HMI device, including checking contents and conditions.
Specifies required clearances around the HMI device for proper ventilation.
Provides requirements for making the mounting cut-out to ensure degrees of protection.
Details the procedure for physically mounting the HMI device using clamps.
Explains how to secure the HMI device using aluminum mounting clamps.
Explains how to secure the HMI device using plastic mounting clamps.
Describes the overall process of connecting the HMI device.
Lists the sequence of tasks for connecting the HMI device, including tools.
Explains how to connect the equipotential bonding circuit to prevent potential differences.
Details the procedure for connecting the 24 VDC power supply to the HMI device.
Describes how to connect a programming device (PG) to a Basic Panel DP.
Explains how to connect a configuration PC to a Basic Panel DP for project transfer.
Details how to connect the HMI device to a PLC via different interfaces.
Describes how to secure cables to the HMI device for strain relief.
Covers the general operation of HMI devices with touch screens and function keys.
Provides precautions and guidelines for operating the touch screen safely and effectively.
Explains the functions of keys available on the screen keyboard for touch devices.
Details how to enter alphanumeric and numerical data on the KTP400 Basic.
Guides users on entering alphanumeric values using the screen keyboard.
Guides users on entering numerical values using the screen keyboard.
Explains data entry for KTP600, KTP1000, and TP1500 Basic devices.
Covers operation of the KP300 Basic, including system keys and function keys.
Provides a step-by-step guide for navigating and operating menus on the KP300 Basic.
Explains how to navigate and interact with an active project on the HMI device.
Details operation of the KP400 Basic, including alphanumeric assignments and functions.
Describes additional key functions for operating the Control Panel and dialogs.
Guides on entering data on the KP400 Basic, similar to cell phone key operation.
Explains how to configure HMI devices using the graphical Control Panel.
Details how to access and open the Control Panel on the HMI device.
Describes how to set up password protection for the Control Panel to prevent unauthorized access.
Lists the functions available in the Control Panel for HMI device configuration.
Guides on changing MPI/PROFIBUS DP communication settings for the HMI device.
Explains how to configure network settings, including IP address and PROFINET parameters.
Details how to configure time synchronization using a time server.
Covers adjusting monitor settings like brightness, contrast, and screen orientation.
Shows how to view device information, useful for technical support.
Provides instructions for calibrating the touch screen for accurate input.
Guides on how to display licensing information for the HMI device software.
Explains how to enable data channels for project transfer to the HMI device.
Details how to activate and deactivate password protection for the Control Panel.
Instructions on how to configure the screen saver to prevent burn-in.
Guides on enabling acoustic feedback for touch screen interactions.
Covers configuration specific to the KP300 Basic, including Control Panel access.
Shows the menu structure of the Control Panel for KP300 Basic configuration.
Details how to access device information via the "Info/Settings" menu.
Explains how to adjust contrast and startup delay for the KP300 Basic.
Guides on enabling data channels for the KP300 Basic (PROFINET).
Details network configuration for KP300 Basic, including IP and PROFINET settings.
Explains how to configure time synchronization for the KP300 Basic.
Guides on setting password protection for the KP300 Basic Control Panel.
Details how to configure the screen saver for the KP300 Basic.
Explains the configuration and process control phases for projects.
Describes the different operating modes (Offline, Online, Transfer) of the HMI device.
Compares data transfer options for Basic Panels DP and PN.
Covers the process of transferring projects from PC to HMI device.
Details how to manually initiate a project transfer to the HMI device.
Explains how to activate and use automatic project transfer.
Guides on how to test projects, both offline and online, on the HMI device.
Outlines how to back up and restore HMI device data using various tools.
Provides steps for backing up and restoring data using WinCC flexible.
Details how to back up and restore HMI device data using ProSave.
Covers updating the operating system for Basic Panel DP devices.
Explains methods for updating the OS, including compatibility and data loss.
Guides on resetting the HMI device to factory settings via ProSave, WinCC flexible, or WinCC.
Step-by-step instructions for updating the OS using WinCC flexible.
Details how to update the OS using ProSave.
Covers updating the operating system for Basic Panel PN devices.
Explains OS update methods for PN devices, including data loss warnings.
Guides on resetting factory settings for PN devices.
Instructions for updating the OS using WinCC flexible for PN devices.
Details OS update procedures using ProSave for PN devices.
Explains OS update procedures using WinCC for PN devices.
Guides on resetting to factory settings using WinCC flexible.
Details resetting to factory settings using ProSave.
Explains resetting to factory settings using WinCC.
Provides instructions on cleaning and maintaining the HMI device.
Information on the recycling and disposal of HMI devices.
Lists the certifications and approvals obtained by the HMI device.
Details directives and declarations relevant to the HMI device, including EMC.
Explains EMC behavior regarding pulse-shaped and sinusoidal interference.
Provides guidelines on Electrostatic Discharge (ESD) protection measures.
Shows dimensional drawings for various HMI device models.
Details specifications like power supply, weight, display, input devices, memory, and interfaces.
Lists specifications for KP300 and KP400 Basic models, including weight, display, and input.
Lists specifications for KTP400 and KTP600 Basic models.
Lists specifications for KTP1000 and TP1500 Basic models.
Details transport, storage, and operating conditions for the HMI device.
Specifies mechanical and climatic conditions for transport and storage.
Outlines mechanical and climatic conditions required for HMI device operation.
Covers insulation tests, protection classes, and IP ratings for the HMI device.
Describes the power supply, PROFIBUS, and PROFINET interfaces.
Details the pin assignment and voltage for the power supply connector.
Describes the PROFIBUS interface, including pin assignments for RS422/RS485.
Details the PROFINET interface, including pin assignments and LED meanings.
Lists the functional scope of WinCC flexible and WinCC for Basic Panels.
Provides contact information and resources for technical support and service.
Explains system events and their relevance for troubleshooting HMI devices and PLCs.
