To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6AV6647-0AF11-3AX0 and is the answer not in the manual?
General| Display Type | TFT |
|---|---|
| Resolution | 1280 x 800 pixels |
| Color Display | Yes |
| Touch Operation | Yes |
| Operating System | Windows CE |
| Supply Voltage | 24 V DC |
| Operating Temperature | 0 to 50 °C |
| Product Type | Comfort Panel |
| Interface | Ethernet |
| Installation Type | Panel mounting |
| Protection Class | IP65 |
| Relative Humidity | 10 to 90 % |
Outlines the step-by-step procedure for commissioning an HMI device.
Provides essential safety guidelines for working with HMI devices and control cabinets.
Details preparatory steps before mounting and connecting HMI devices.
Details the procedure for physically mounting the HMI device into a control panel.
Introduces the process of connecting the HMI device, listing required tools.
Outlines the sequential steps for connecting the HMI device components.
Explains the importance and procedure for connecting the equipotential bonding circuit.
Details the steps for stripping cables and connecting the power supply to the HMI device.
Describes how to connect a programming device (PG) to a Basic Panel DP.
Explains how to connect a PC for configuring the HMI device using various cables.
Details how to connect the HMI device to a PLC using different interfaces.
Guides on powering on and performing initial tests on the HMI device.
Introduces operating HMI devices with touch screens and function keys.
Details how to interact with the touch screen, including precautions.
Explains the specific input method for data entry on the KTP400 Basic device.
Details the process of entering alphanumeric data using the screen keyboard.
Details the process of entering numerical data using the screen keyboard.
Explains data entry for specific HMI models using alphanumeric keyboards.
Covers the operation of the KP300 Basic, including system keys and menu navigation.
Details data input methods using the keypad-like function keys on KP300 Basic.
Guides on navigating and interacting within a running project on the HMI device.
Explains how to input numbers and characters using the function keys.
Covers the operation of the KP400 Basic, including key assignments and functions.
Guides on data input for the KP400 Basic, similar to cell phone keypads.
Explains how to configure devices using the graphical Control Panel.
Guides on configuring MPI or PROFIBUS DP communication settings for the HMI device.
Provides steps for recalibrating the touch screen for accurate input.
Covers configuration settings specific to the KP300 Basic model.
Explains how to open the Control Panel on the KP300 Basic device.
Details how to adjust contrast and startup delay settings on KP300 Basic.
Explains how to enable data channels for PROFINET on KP300 Basic.
Guides on configuring network settings like station name and IP address on KP300 Basic.
Explains how to configure time synchronization for the KP300 Basic.
Details password management for the KP300 Basic's menu.
Lists and explains the different operating modes of the HMI device: Offline, Online, Transfer.
Shows available data transfer options between HMI and PC for different panel types.
