Siemens 6AV6647-0AF11-3AX0 - Configuring the HMI device; Configuring devices with graphical Control Panel

Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
67
Configuring the HMI device
5
5.1 Configuring devices with graphical Control Panel
5.1.1 Opening the Control Panel
With the exception of the KP300 Basic mono PN, all Basic Panels have a graphic Control
Panel.
%DVLF3DQHOV'3
%DVLF3DQHOV31

Open the Control Panel by pressing
the "Control Panel" button of the
Loader.
Configure your HMI device in the
Control Panel. You can make the
following settings:
• Communication settings
• Settings for operation
• Password protection
• Transfer settings
• Screen saver
• Acoustic signals
The "MPI / Profibus Settings" is only
available on Basic Panels DP.
The "Profinet" is only available on
Basic Panels PN.
The "Sound Settings" symbol is only
available on devices with sound
reproduction.