7.6 Recycling and disposal
For environmentally friendly recycling and disposal of your old device, please contact a company
certied for the disposal of electrical and electronic waste and dispose of the device in
accordance with the regulations in your country.
7.7 Standards and approvals
Approvals
CE approval
Figure 7-1 CE marking
The operator panels and the safety-relevant accessories satisfy the requirements and protection
objectives of the following EC directives. The operator panels and the safety-relevant accessories
comply with the harmonized European standards (EN), promulgated in the Ocial Journals of
the European Community:
• 2004/108/EC "Electromagnetic Compatibility" (EMC directive)
• Directive 2006/42/EC of the European Parliament and Council of May 17, 2006, on
machinery, and Directive 95/16/EC (amendment)
China RoHS
The products comply with the China RoHS directive. Further information can be found in the
Internet at the following link: SIOS (https://support.industry.siemens.com/cs/document/
109738656/china-rohs-manufacturer?dti=0&lc=en-WW)
Risk assessment
The following standards must be used to perform the risk assessment:
• EN ISO 12100-1:2003 and EN ISO 12100-2:2003, General Design Guidelines for Machines
• EN ISO 14121-1:2007, Risk Assessment for Machinery
• EN ISO 13849-1:2008, Safety-related Parts of Machines
These considerations result in a category (B, 1, 2, 3, 4) and a performance level (PL a to e) in
accordance with EN ISO 13849-1:2008 that ultimately dictate how the safety-related parts of
the system to be monitored must be constructed.
The connection examples with dierent monitoring units in "Handheld units", Section: "HT 2",
Section: "Connections" → "Connection examples for acknowledgment button and Emergency
Stop button" can also be used for other operator panels and demonstrate how Category 3, PL d
according to EN ISO 13849-1:2008 can be attained with the safety-related parts of the operator
panels. Note that the overall concept of the installation must be designed with this in mind.
Technical specications
7.7 Standards and approvals
Handheld Terminal HT 10
Equipment Manual, 09/2020, A5E47430965B AA 89
To Next Page
Loading...
Need help?
General
