17SICAM P850/P855 7KG85xx, Product Information
E50417-B1050-C482-A3, Edition 03.2013
10.2 Flush-mounting/Assembly
Flash-mounting of the device into a panel
 Swing the mounting element (provided with the
device) over the rear cone.
Figure 10-1 Panel Flush Mounting
 Move the mounting element to the position. Use a
screw driver (0.6 mm x 4.5 mm) to fix the mounting
elements until the slipping clutch takes effect.
NOTE
To provide sufficient protection against high contact
voltages, install the device correctly.
Mounting plate
Mounting element
≥ 1 mm, steel
To Next Page
Loading...
