Need help?Do you have a question about the Siemens SICAM P 7KG7755 and is the answer not in the manual?
General| Product designation | SICAM P |
|---|---|
| Model Number | 7KG7755 |
| Product Type | Measuring Instrument |
| Brand | Siemens |
| Measurement Category | CAT III |
| Power Supply | AC/DC |
| Current Input | 1 A / 5 A |
| Accuracy | Class 0.5 |
| Communication Interface | RS485, Ethernet |
| Operating Temperature | -20 to +55 °C |
| Storage Temperature | -40°C to +70°C |
| Dimensions | 96 x 96 mm |
Provides critical safety guidelines, including danger, warning, caution, and important notes for device operation.
Presents an overview of firmware versions V03 and V04 for the SICAM P 7KG7750/55.
Details the steps and implications of updating the device firmware from V03 to V04.
Covers configuration of bus specific parameters for serial communication and device setup.
Details IEC 60870-5-103 settings like bus address, baud rate, and parity.
Describes the supported functional range and basic application functions of the IEC 60870-5-103 slave interface.
To Next Page