To Next PageTo Next Page
Need help?Do you have a question about the Siemens SICAM Q100 and is the answer not in the manual?
General| Communication Interfaces | Ethernet, RS485 |
|---|---|
| Mounting | DIN rail mounting |
| Frequency Measurement Range | 45 to 65 Hz |
| Communication Protocols | Modbus RTU, Modbus TCP |
| Power Supply | 24 V DC |
| Operating Temperature | -20 to +60 °C |
| Protection Class | IP20 |
| Display | LCD display |
| Current Measurement Range | 0 to 5 A |
Details how the SICAM Q100 measures power quality according to IEC standards and its recording capabilities.
Lists and categorizes the various electrical quantities that the device can measure and record.
Provides instructions for safely unpacking, inspecting the device, and installing or replacing the battery.
Covers essential safety notes and procedures for connecting the device's electrical components.
Outlines the initial commissioning steps, including power connection and device startup.
Provides wiring diagrams and examples for connecting the SICAM Q100 in various power system configurations.
Explains how to start the user interface, including network connection checks and enabling JavaScript.
Details procedures for getting, editing, and activating device configurations, including loading from files.
Describes how to display and evaluate measured values, including harmonics, power, and status.
Illustrates the menu tree for parameterizing various device functions via the display.
Details visual inspection and functional checks to perform when function failures occur.
Describes the meaning and functions of the device's LEDs for indicating operational status and errors.
Provides general troubleshooting advice and guidance on handling error messages.
Details parameters for AC measurement, binary inputs, binary outputs, and LEDs.
Details settings for time synchronization, communication interfaces, and device language.
