Need help?Do you have a question about the Siemens SICAM P38 and is the answer not in the manual?
General| Display | Graphical LCD |
|---|---|
| Input voltage | 100 ... 230 V AC, 110 ... 250 V DC |
| Frequency | 45 ... 65 Hz |
| Communication Interfaces | Ethernet, RS485 |
| Protocols | IEC 61850, Modbus TCP/RTU, DNP3 |
| Operating Temperature | -20 ... +55 °C |
| Mounting | DIN rail |
| Power Supply | 100 ... 230 V AC, 110 ... 250 V DC |
| Protection Class | IP20 |
Details voltage, current, power, frequency, and harmonic measurement parameters and accuracies.
Lists measured parameters like voltage, current, power, harmonics, and wave crest factor.
Details active, reactive, and apparent energy metering, including import/export and fundamental values.
Explains demand calculation, terms, and settlement procedures including cross-month settlement.
Describes how the device detects and records limit violations, power failures, and other events.
Advises on suitable environments, temperature, humidity, and mounting stability.
Specifies wire types, sizes, fuse requirements, and CT short-circuiting for safe wiring.
To Next Page