right page (9) of A52 DTC en, A31008-H6210-A1-1-7619 (12.10.2004, 14:19)
Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\A51_A52 Fox\en\DTC_A52_Main.fm
9
Setup
VAR Language: en; VAR issue date: 040915
Divert
You can set the conditions for which calls
are diverted to your mailbox or other
numbers.
§Menu§ ¢ Setup ¢ Divert
¢ Select a function.
Set up call divert (example)
All calls b
All calls are diverted. n is shown in the
top line of the display in standby mode.
Unanswered calls b
Includes Unanswered, Not reachable,
No reply, Busy.
§Select§ ¢ Set ¢ J (Enter the phone
number to which the call should be
diverted)
¢ §OK§
After a short pause, the setting is con-
firmed by the network.
Status check
After a short pause the current informa-
tion is shown.
p Condition set.
o Not set.
Display, if status is unknown
(e.g. on a new SIM card).
Clear all b
All set diversions are cleared.
Clock
§Menu§ ¢ Setup ¢ Clock
¢ Select a function.
Security
§Menu§ ¢ Setup ¢ Security
¢ Select a function.
Direct call
Only one phone number can be dialled.
Press and hold control key on the right (p. 5).
This SIM only b
Your phone is prevented from being used
with a different SIM card.
Barrings b
Network barring restricts the use of your
SIM card.
All outgoing calls: Outgoing calls, except
emergency 999 calls, are blocked.
Outgo internat: Only national calls can be
made.
Out.int.x home: International calls are not
permitted, except for calls to your home
country.
All incom. calls: The phone is blocked from
receiving all incoming calls.
When roaming: You do not receive any calls
outside your home network.
Status check: Query the status of your bar-
rings.
Clear all: Clear all barrings. Password pro-
tected!
Phone identity
The phone identity number (IMEI) is dis-
played.
Master reset
The phone is reset to the default values
(does not apply to SIM card and network
settings).
Alternative input in standby mode:
*
# 9 9 9 9 #
A
To Next Page
Loading...
