Need help?Do you have a question about the Siemens AR6181-MX and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | AR6181-MX |
| Category | Card Reader |
| Language | English |
Critical safety guidelines and warnings for proper and safe use of the unit.
Details on available interfaces for reader communication, e.g., RS485, Clock/Data.
Procedure for installing the reader in a standard flush-mounting electrical box.
Guidance for mounting the reader onto a surface using the provided distance frame.
Details and diagrams for connecting the reader via the RS485 interface.
How to set the reader's address for RS485 bus operation using DIP switches.
Selecting the communication interface and protocol via DIP switches.
How to configure which card information is read by the reader.
Overview of supported RFID card technologies and their characteristics.
Overview of the various data formats available for transponder output.
How to access the special configuration mode using DIP switch settings.
Instructions on how to define and set configuration parameters for the reader.
Steps to launch and set up the HyperTerminal program for reader configuration.
Specifies the required settings for HyperTerminal, such as baud rate and data bits.
Detailed steps for configuring HyperTerminal's settings for reader communication.
Configuration of ASCII sending and receiving parameters within the terminal program.
Instructions on how to send configuration files to the reader using HyperTerminal.
Lists and explains the commands available for interacting with the reader.
Step-by-step guide for loading new firmware onto the card reader.
Specifies the required parameters for the terminal connection during firmware update.
Instructions on how to send the firmware file to the reader.
Parameter for defining the card technology processed by the reader.
Details for configuration parameter C04, covering ID memory access and Mifare addressing.
Management and handling of PIN codes with the RS485 CerPass protocol.
Management and handling of PIN codes with the RS485 UCI protocol.
Management and handling of PIN codes with the Clock/Data Omron interface.
Management and handling of PIN codes with the Clock/Data Wiegand interface.
Instructions on how to define reading keys for Mifare Standard 1k and 4k cards.
To Next Page