Siemens BE634 G 1I Series - Basic Settings

Basic settings en
15
12.2 Changing the timer
1.
Press ⁠.
a The display shows the timer.
2.
Use the rotary selector to change the timer duration.
Note:The timer remains visible on the display if the ap-
pliance is switched off.
If an operating mode is running, you can use to se-
lect the timer. The timer duration is highlighted for a
short time. You can change the timer duration.
12.3 Cancelling the timer
▶
Reset the timer duration.
a Once this is implemented, the symbol no longer
lights up.
13 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
13.1 Changing basic settings
1.
Press ⁠.
2.
Press ⁠.
a The operating modes menu opens.
3.
Use the rotary selector to select "Settings".
4.
Press ⁠.
5.
Use the rotary selector to change the values.
6.
Always use to switch to the next settings and, if re-
quired, to make any changes.
7.
Press ⁠.
a "Discard" or "Save" appears on the display.
8.
Select "Save" to save the setting.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
13.2 Overview of the basic settings
This is where you can find an overview of the basic set-
tings and factory settings. The basic settings depend
on the features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
even after a power failure. Only the settings pertain-
ing to the initial start-up of the appliance need to be
implemented once again following a power failure.
→"Initial use", Page9
Basic settings Selection
Language Set "Language"
Time Set "Time "
1
Factory setting (may vary according to model)
Basic settings Selection
Date Set "Date"
Audible signal Short cooking time
Medium cooking time
1
Long cooking time
Button tone Switched off
1
Switched on
Display bright-
ness
The display brightness can be adjus-
ted in 5 settings
Setting3
1
Clock display Digital + date
Digital
Off
1
Night-time dim-
ming
Switched off
1
Switched on (display dimmed
between 10 p.m. and 6 a.m.)
Demo mode Switched off
1
Switched on (this is only displayed in
the first 3 minutes following a reset
or the initial start-up)
Factory set-
tings
Reset
Do not reset
1
1
Factory setting (may vary according to model)
Note:Changes to the language, button tone and dis-
play brightness settings take effect immediately. All
other settings do not take effect until you save them.
13.3 Changing the time
1.
Press ⁠.
2.
Press ⁠.
a The operating modes menu opens.
3.
Use the rotary selector to select "Settings".
4.
Use to navigate to "Time ".
5.
Use the rotary selector to change the time.
6.
Press ⁠.
7.
Select "Save" to save the setting.