en Installation instructions
18
12.10 Installing the appliance
1.
Secure the spacers to the appliance in accordance
with the wall thickness.
2.
Note:
Do not trap or kink the power cable.
Insert the appliance into the unit and move it to the
right.
3.
Screw the appliance in until the appliance is cent-
rally aligned.
4.
Check the clearance to the adjacent appliances.
The clearance to the adjacent appliances must be
at least 3mm.
5.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
To Next Page
Loading...
