Memory en
11
Note: The 800 W microwave power setting can be set
for 30 minutes, 600 W for 1 hour and the other power
settings for 1 hour and 39 minutes.
Setting the microwave
Example: Microwave power setting 600 watts,
10 minutes
1. Touch the microwave power setting you require.
The indicator light above the microwave power
setting will light up.
2. Use the settings area to set the cooking time you
require.
3. Touch the "Start" button.
You will see the cooking time counting down on the
display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or press "Stop". The clock reappears.
Changing the cooking time
This can be done at any time. Change the cooking time
using the control panel.
Pausing the appliance
Touch the Stop button once or open the appliance
door. This pauses the appliance. The indicator above
the Stop button will light up.After closing the door, touch
the Start button again.
Cancelling the operation
Open the appliance door and press "Stop" once; or
press "Stop" twice.
Note: You can also adjust the cooking time first and
then the microwave power setting.
BMemory
Memor y
The memory function allows you to save the setting for
a dish and call it up at any time.
The memory function is useful if you prepare one dish
particularly frequently.
Saving memory settings
Example: 360 W, 25 minutes
1. Touch the i button.
The indicator light above the button will light up.
2. Touch the microwave power setting you require.
The indicator light above the button will light up and
1:00 min will appear on the display.
3. Use the settings area to set the cooking time.
4. Press the i button to confirm.
The clock will then reappear. The setting has been
saved.
Notes
■ You cannot save several microwave power settings
one after the other.
■ You cannot save automatic programmes.
■ You can save the memory settings and start the
appliance immediately. To finish, do not touch i,
touch "Start" instead.
■ To create a new memory setting: Touch "Start". The
old settings appear. Save the new programme as
described in steps 1-4.
Starting the memory
It is very easy to start the saved programme. Place your
meal in the appliance. Close the appliance door.
1. Touch i.
The saved settings are displayed.
2. Touch "Start".
The cooking time counts down in the display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or press "Stop". The clock reappears.
Pausing the appliance
Touch the Stop button once or open the appliance
door. This pauses the appliance. The indicator above
the Stop button will light up.After closing the door, touch
the Start button again.
J
VWRS
VWDUW
PLQ
NJ
PLQ
J
VWRS
VWDUW
PLQ
NJ
PLQ
To Next Page
Loading...
Need help?
General
