Siemens C62 - Text Entry; Basic Text Input

SIEMENS PTE LTD
C62 Level 2 Service Manual
Copyright © Siemens Pte Ltd. C62 Level 2 manual V1.1
All Rights Reserved
ICM MP CCQ SLI RHQ 25 of 47 Internal Use Only
Flash Programmer
Open the Flash Programmer and the following window will appear.
FLASH
Flashing process
The flash button is disabled if the Flash Programmer options are not correctly set. Basic setting
for flashing process is:
1. Select the hardware version “auto-detect” from the list.
2. Select the software release from the list. Latest is the biggest number of the software
versions.
3. Select the language package “same as current” from the list. None means that no
language package is selected.
4. Select the customization package “None” from the list.
5. Press “Flash”. (Window shown below appears)