SIEMENS PTE LTD
C62 Level 2 Service Manual
Copyright © Siemens Pte Ltd. C62 Level 2 manual V1.1
All Rights Reserved
ICM MP CCQ SLI RHQ 26 of 47 Internal Use Only
PREPARING TO FLASH
Reset the phone (turn phone off and on) and the flashing will start automatically.
The window seen below appears when flashing is done.
FLASHING COMPLETED
Flashing is completed. Press “Close” to exit the flashing.
Recovery Flash
If flashing of the phone fails you can use Recovery Flash. Select “Recovery Flash…” from the
Phone menu as seen below. After using Recovery Flash you can try to flash the phone again.
PHONE MENU
To Next Page
Loading...
