Company Confidential s Com
Copyright 2005© Siemens AG
Page
2 of 10
Service Repair Documentation Level 2.5 - CF62, CF62R, CF63
Introduction
This Service Repair Documentation is intended to carry out repairs on Siemens repair level
2.5. The described failures shall be repaired in Siemens authorized local workshops.only
All repairs have to be carried out in an ESD protected environment and with ESD protected
equipment/tools. For all activities the international ESD regulations have to be considered.
Assembling/disassembling has to be done according to the latest CF62, CF62R, CF63
Level 2 repair documentation. It has to be ensured that every repaired mobile Phone is
checked according to the latest released General Test Instruction document (both
documents are available in the Technical Support section of the C-market).
Check at least weekly C-market for updates and consider all CF62, CF63 related Customer
Care Information
CF62 Partnumber on IMEI label: S30880-S6050-#xxx
CF62R Partnumber on IMEI label: S30880-S6040-#xxx
CF63 Partnumber on IMEI label: S30880-S6060-#xxx
, while # may be any letter (A-Z) and xxx may be any number from 100, 101, 102....
If you have any questions regarding the repair procedures or technical questions spare not
hesitate to contact our technical support team in Kamp-Lintfort, Germany:
Scrap Handling: All Scrap information given in this manual
are related to the SCRAP-Rules and instructions.
Attention: Consider soldering rules, avoid excessive heat
Tel.: +49 2842 95 4666
Fax: +49 2842 95 4302
e-mail: st-support@klf.siemens.de
To Next Page
Loading...
Need help?
General
