EasyManua.ls Logo

Siemens CT636LE Series - Preparing Milk-Based Drinks

Siemens CT636LE Series
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
en
Preparation using milk
This fully automatic coffee machine has
an integrated beverage outlet. This can be
used to prepare coffee drinks with milk or
also milk froth and warm milk.
Risk of burns!
The beverage outlet gets very hot.
After use, always let it cool down
before you touch it.
Milk container
The milk container has been designed
especially for use together with this fully
automatic coffee machine. It is intended
solely for use in the household and for
storing milk in the refrigerator. The insulated
container keeps milk cool for a number of
hours.
Important
before opening the door in case they
fall.
Connecting the milk container or a milk
carton:
Open the appliance door.
towards the front.
connecting elements as illustrated.
to the beverage outlet.
Attach the suction pipe and insert into the
milk container or a milk carton.
Close the appliance door.
For optimal milk froth quality, use
cold milk with a fat content of at least
1.5 % if possible.
Dried milk residues are difficult to
remove, therefore always clean
(see the section “Cleaning the
milk system”).
Coffee drinks with milk
Place a cup or glass underneath the
beverage outlet.
Select Espresso Macchiato,
Cappuccino, Latte Macchiato or
Caffe Latte with the rotary selector.
The display shows the selected drink along
with the preset values for the strength of the
coffee and the amount for this drink.
The settings can be changed
as described in the section
Drink adjustment”.
Press to start dispensing.
The milk is dispensed into the cup or glass
into the cup or glass.
Press button again to stop the
current step of the process prematurely.

Other manuals for Siemens CT636LE Series

Related product manuals