45
en
The settings can be changed
as described in the section
“Drink adjustment”.
Press to start dispensing.
The message appears “Milk tube
removed from milk container?”.
If still connected, remove the milk tube
and touch [ Yes ] on the display.
Press button again to stop the
procedure prematurely.
Personalised drinks
Press to open the selection for
personalised drinks.
Up to 8 storage spaces can be used. Save
your favourite drinks that are frequently
dispensed here with all their settings.
Press to exit the menu
without saving at any time.
Entering or changing drinks
Press .
The selection of memory locations appears.
myCoffee 1
Create beverage
Using the rotary selector, choose an
empty memory location (empty cup)
to make a new entry, or an occupied
memory location to change or delete a
favourite drink.
At an empty memory location
[ Create beverage ] or an occupied
memory location [ Change beverage ].
If [ Delete beverage ] is selected, the
settings for the memory location are
deleted and it is again empty.
The menu for adjusting the drinks opens.
The last drink dispensed is shown with the
last settings selected.
If you do not wish to save last drink
dispensed, select another drink with the
rotary selector.
Touch each setting to be changed and
adjust the values as desired with the
rotary selector.
Other setting options appear depending on
the selection.
Touch [ Continue ] to make other settings.
For milk drinks, the mixing ratio of
coffee and milk can be set.
The settings can be stored under an
individual name. Touch [ Save name ].
The mask for entering the name opens.
3 4 5 6 7 8 9 ´ _ < A B C D E F G H I J K
A _ _ _ _ _ _ _ _ _
SaveCancel
Using the rotary selector, select a letter or
a symbol in the upper row.
Touch
to delete it.
Select other letters or symbols and
Touch [ Cancel ] to exit the entry without
menu.
With [ Save ] the entry is adopted. The
selection menu opens.
Press to exit the menu.
Select a personalised drink and
dispense
Press .
The selection of memory locations opens.
Use the rotary selector to select the
desired memory location.
Place a cup or glass underneath the
beverage outlet.
Press to start dispensing.
To Next Page
Loading...
Need help?
General
