37
en
Controls
The appliance features user-friendly menu
navigation to ensure that operation is as
easy as possible while at the same time
offering a wide range of functions. That
means a range of options can be selected
with just a few operating steps.
Mains switch
Use the mains switch (to do so open
the door) to switch on the appliance, or to
switch it off fully (power supply off).
Important: Do not press the mains
switch while the appliance is in use.
Switch off the appliance only when
it is in energy saving mode, so that it
can rinse automatically.
Button
Press button to switch on
the appliance or change it to energy
saving mode. The appliance is rinsed
automatically.
The appliance does not rinse if:
if it is still warm when switched on, or
if no coffee was dispensed before it was
switched off.
The appliance is ready for use as soon as
the symbols for the drinks selection appear
on the display.
Button
Press button to open the menu.
Settings can be made and information
called up (see the section “Menu”).
Button
Press button to open the selection
programme as described in the section
“Service programmes”.
Button
Press button to open the selection
of “Personalised beverage preparation”.
Personal settings for coffee drinks can
be saved and called up (see the section
“Personalised drinks”).
Button
Press button after selecting a drink to
prepare two cups simultaneously (see the
section “Two cups at once”).
Press , ,
or again to exit the respective
menu.
Button
Press to either begin preparing
a drink or launch a service programme.
Press again while the drink
is being prepared to prematurely halt
dispensing.
Rotary selector
Turn the rotary selector to navigate in the
display or to change parameters.
Display (Touchscreen)
Information is shown on the display, or
settings can be made by touching the
touchscreen (see the section “Display”).
To Next Page
Loading...
Need help?
General
