Need help?Do you have a question about the Siemens DE18307M and is the answer not in the manual?
General| Voltage | 240 V |
|---|---|
| Wattage | 18 kW |
| Power | 18 kW |
| Amperage | 75 A |
| Flow Rate | Up to 4.4 GPM |
| Activation Flow Rate | 0.5 GPM |
| Minimum Circuit Breaker | 2 x 40 A |
| Wire Size | 2 x 8 AWG |
| Frequency | 60 Hz |
| Type | Tankless |
| Capacity | Tankless |
| Material | Copper |
| Safety Features | Overheat protection |
| Thermostat | Electronic Thermostat |
Read manual carefully, store for reference, include with appliance transfer.
Risk of shock, disconnect power, avoid live parts, ensure protective earth connection.
Connect to pipes, use qualified personnel, adhere to regulations, check water resistivity.
Check for transport damage, verify all components, dispose packaging properly.
Use supplied set, install nozzles, shut off water, disconnect power, check connections.
Ensure watertight sealing, secure mounting, use spacers for wall unevenness.
Set power via switch, screw wires tightly, switch on safety limiter, install cover.
Switch on fuses, set temperature, rinse for 1 minute before heating.
Remove limiter for low flow; use special relay for priority circuit, may need coding.
List of special accessories like pipe kits, mounting kits, and premixers.
To Next Page
