To Next PageTo Next Page
Need help?Do you have a question about the Siemens euroset 2015 and is the answer not in the manual?
General| Color | White |
|---|---|
| Ringer Volume | Adjustable |
| Wall Mountable | Yes |
| Display | No |
| Type | Analog Telephone |
| Dialing | Pulse/Tone |
| Features | Redial, Mute, Flash |
Explains the function of various keys on the telephone device.
Details the meaning of symbols shown on the phone's display.
Instructions for connecting the telephone handset and cord to the wall socket.
Details the phone's approval within the European Economic Area.
General advice on confirming telephone settings to make them permanent.
How to save up to 32 call numbers using repertory keys.
Method for saving call numbers using the notebook function.
Instructions for storing a hot key number.
Instructions for deleting a stored hot key number.
How to dial a call number using the keypad.
Using programmed repertory keys to dial numbers.
Redialing the last 5 dialed numbers.
How to dial a hot key number when the phone is locked.
Adjusting the volume level for incoming call ringtones.
Adjusting the speed or pitch of the incoming call ringtone.
Selecting one of ten different melodies for incoming calls.
Adjusting the volume level for the loudspeaker during a call.
Enables room listeners to hear calls via the loudspeaker.
Disables room listeners from hearing calls via the loudspeaker.
Activates handsfree mode by replacing handset while pressing loudspeaker key.
Activates handsfree mode by pressing loudspeaker key before dialing.
How to deactivate handsfree talking by lifting the handset.
Temporarily disables the microphone during a call.
Activating or deactivating music for the mute function.
Adjusting the volume level for the telephone handset.
Procedure to change the 4-digit Personal Identification Number.
Prevents unauthorized changes to repertory numbers.
Restricts phone usage, allowing only hot key dialing.
Unlocking the phone for a single call.
Enables display of approximate call duration during calls.
Disables the display of approximate call duration.
Storing or removing access codes for private PABX systems.
Changing between tone and pulse dialing modes.
Change dialing mode (pulse/tone) during an active call.
Adjusts the recall key's flash time for private PABXs.
Notes on using the recall key for public system services.
Controls the display of service status symbols on the phone screen.
Assign call forwarding functions to repertory keys.
Specifying a fixed or variable number for call forwarding.
Activates call forwarding to a pre-set number using a function key.
Activates call forwarding with a number entered at the time of activation.
Assigns the deactivation of call forwarding to a function key.
Uses a function key to deactivate call forwarding.
Guidelines for proper placement and care of the telephone.
Solutions for common problems like no tone or faulty dialing.
Information on whom to contact for assistance with the phone or line.
