Siemens Euroset 5020 - Saving repertory numbers; Adjusting the telephone; Adjusting the ringer volume

euroset 5020 / SAR arab-eng-fra / A30350-M209-H301-2-3T19 / 5020.fm / 03.08.2006
3
GB
Last number redial
The last 5 numbers dialled (up to 32 digits) are saved
automatically. You can retrieve these numbers from the last
number redial list and dial them again:
Redialling the last number dialled
c; Lift the handset and press the last number
redial key. The last number dialled is redialled
immediately.
Dialling from the last number redial list
; Without lifting the handset: Press the last
number redial key.
The last number dialled is displayed. (You can
leave the last number redial list at any time by
pressing
>.)
A...C Using the Down/Up key, scroll through the list
to the desired number.
B Press OK or L key.
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Dialling using the repertory keys
c Lift handset. (If necessary, press = for a 2nd
level repertory key).
: Press repertory key.
or ...
: Press repertory key. (If necessary, press = for
a 2nd level repertory key).
Bc Press OK or L key.
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Saving numbers
Different telephone settings must be completed with the
Set key
? so that they are available permanently.
In order to cancel without saving, e. g. after an incorrect
entry, replace the handset instead of pressing
? at the
end. The original setting is then retained.
Saving with notebook function
You can also save phone numbers during a conversation
with the notebook function.
Saving repertory numbers
You can save up to 20 phone numbers (or even functions,
see page 7) on both levels of the repertory keys.
? Press the Set key. (For 2nd memory level, also
press
=.)
: Press the repertory key under which you want
to save the repertory number.
A number that has already been saved is
shown in the display. If the memory for this
repertory key is empty,
z appears in the display
o Enter the number to be saved (up to 32 digits).
or ...
Saving from the calls list (if service is available)
A...C Press the Down/Up key until the desired
number appears in the display.
or ...
Saving from the redial list:
; Press the last number redial key.
A...C If necessary, press the Down/Up key until the
desired number appears in the display.
To terminate the process:
? Press the Set key.
Saving during a call
You can also save phone numbers in the same way during a
call (notebook function).
Delete all repertory numbers
?1251
Initiate function.
? Press the Set key.
Adjusting the telephone
Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels and
can also be deactivated completely (default setting: level 4).
◆ To adjust when the telephone is idle:
?5 Initiate function.
H...I Adjust the volume with the Loud/Quiet key.
? Press the Set key.
◆ To adjust while the telephone is ringing:
Note:
After the 20th digit, any following digits are moved from right to left
in the display.