124
Web configurator – configuring the telephone via a PC
Configuring telephone connections
Gigaset C470IP / GRC eng / A31008-M1916-T101-2-8U19 / web_server.fm / 20.12.07
Version 2.1, 08.01.2007
When the download is complete, the Connections list will be displayed.
¤ Activate the connection as described under page 128.
You can now be reached on the corresponding VoIP phone number.
u Automatic configuration of general VoIP provider data
Precondition: You have received your account details from your VoIP provider
(e.g. Authentication Name, Authentication password).
Profile files of the most important VoIP providers are available on the Siemens Internet
server for downloading. The address for the server is stored in your phone (page 147).
Proceed as follows to load the data onto your telephone:
¤ In the Auto Configuration area, click Select VoIP Provider. This will display information on
the download procedure.
The download procedure has several steps:
¤ Click Next.
¤ From the list, select the country for which the list of VoIP providers is to be loaded.
¤ Click Next.
¤ Select your VoIP provider from the list.
If your provider is not included in the list, select Other Provider. In this case you will
have to enter the general provider data by hand (see "Area: General Provider Data"
and "Area: Network" below).
¤ Click Finish.
The details of the selected provider are loaded to your phone and saved under General
Provider Data (page 125) and Network (page 126). You cannot make any further entries
in these areas.
The field Provider shows the name of the selected provider or Other Provider. A link to the
provider's homepage is displayed where available.
To complete configuration of your VoIP connection enter your account data under Per-
sonal Provider Data.
Area: Personal Provider Data
Enter the configuration data that is necessary for accessing your VoIP provider's SIP service.
You will receive this data from the VoIP provider.
The field names (Authentication Name etc.) listed in the following are standard names and
may change. If you have already downloaded the provider's general details ("Select VoIP Pro-
vider" button, see above), field entries will be replaced by provider-specific names to facili-
tate orientation (e.g. SIP-ID instead of Authentication Name).
Authentication Name
Specify the registration or authentication ID agreed with your VoIP provider. The regis-
tration ID serves as the access ID that your phone must specify when registering with
the SIP proxy/registrar server. The Authentication Name is mainly identical to the Username,
i.e. to your Internet phone number.
Please note:
If you click the Select VoIP Provider button, any changes that have been made to the Web page will
be saved and checked. Values may need to be corrected before the Select VoIP Provider operation is
started.
To Next Page
Loading...
