141
Web configurator – configuring the telephone via a PC
Saving messenger access data
Gigaset C470IP / GRC eng / A31008-M1916-T101-2-8U19 / web_server.fm / 20.12.07
Version 2.1, 08.01.2007
If you have selected Messenger Account = Gigaset.net, the field is preconfigured with the
name of the Gigaset.net server.
¤ Enter the number of the communication port on the Jabber server in the Jabber server
port field. The default port is 5222.
If you have selected Messenger Account = Gigaset.net, the port number is preconfigured.
¤ Enter a resource name (max. 20 characters) in the Resource field.
The default is: phone.
¤ Enter the priority for your phone in the Priority field. Select a number between -128
(highest priority) and 127 (lowest priority) for the priority.
The default is: 5
¤ Click Set.
Setting up Gigaset.net Jabber account
Your phone is already registered with the Gigaset.net Jabber server. An account has been
assigned to your phone.
In order to chat with other Gigaset.net subscribers via this account, you must transfer the
required Gigaset.net subscribers to a contact list (buddy list) on your PC. You can use any
conventional Jabber client for this (e.g. PSI, Miranda; see e.g. http://www.swissjabber.ch
).
In order to use the Gigaset.net Jabber account, proceed as follows:
¤ Start the Web configurator, open the Settings ¢ Messaging ¢ Messenger Web page and
select the Messenger Account Gigaset.net field. Your account data is displayed in Jabber ID
and Authentication password. You will need these to create a buddy list via the Jabber cli-
ent on the PC.
¤ Start your Jabber client on the PC.
¤ Enter your Gigaset.net Jabber ID on the Jabber client as a new account. The Jabber ID con-
sists of your Gigaset.net number and "@jabber.gigaset.net"
Example: 12345678901#9@jabber.gigaset.net
¤ Then enter your Authentication password.
¤ Now you can enter Gigaset.net subscribers as contacts (buddies).
For the Jabber ID of each subscriber, enter the subscriber's Gigaset.net number with
"@jabber.gigaset.net" (example: 2141524901#9@jabber.gigaset.net).
A request to "Add to contact list" will be sent to the subscriber.
If the subscriber accepts this request, they will be added to your buddy list. This updated
buddy list will be displayed on the handset the next time the messenger is rebooted. To
restart: If necessary, close your connection to the messenger server (page 78) and then go
back online (page 76).
Please note:
–Do not select the option "Create new account". Your Gigaset.net Jabber account has already been
created in Gigaset.net.
– The option "SSL connection" must be deactivated in the Jabber client.
Please note:
For how to use your handset to go online and chat with or call buddies, see page 75.
To Next Page
Loading...
