17
First steps
Connecting the base station
Gigaset C470IP / GRC eng / A31008-M1916-T101-2-8U19 / starting.fm / 20.12.07
Version 2.1, 08.01.2007
Please note:
u Keep the mains adapter plugged in at all times for operation, as the phone does not
work without mains connection.
u Only use the mains adapter and phone cord supplied.
u If you buy a replacement phone cord from a retailer, pay attention to the wiring of the
phone jack.
You can now use your phone to make calls via the fixed line network and can be reached
on your fixed line number.
3. Connect the base station with the router (Internet)
For Internet access you need a router connected to the Internet via a modem (this may be
integrated in the router).
1. Connect one Ethernet cable plug into the LAN socket at the side of the base station.
2. Then insert the second Ethernet cable plug into a LAN socket on the router.
As soon as the cable connecting the phone and router is plugged in, the key lights up on
the front of the base station (paging key).
Correct phone jack assignment
1unused
2unused
3a
4b
5unused
6unused
3
2
1
4
5
6
1
2
To Next Page
Loading...
