19
First steps
Making settings for VoIP telephony
Gigaset C470IP / GRC eng / A31008-M1916-T101-2-8U19 / starting.fm / 20.12.07
Version 2.1, 08.01.2007
You will see the following display:
§Yes§ Press the display key to start the connection assistant.
~ Enter the system PIN (default is 0000) and press §OK§.
If you press §No§, the procedure that follows is described under "Entering your name in the
Gigaset.net directory" on page 20.
Downloading VoIP provider data
The phone establishes a connection with the Siemens server on the Internet. Various pro-
files with general access data for different VoIP providers can be downloaded here.
After a brief period you will see the following display:
q Select country (press up/down on the control key) and press
§OK§. VoIP providers
for which VoIP profiles are available will be displayed.
q Select your VoIP provider and press
§OK§.
The necessary general access data for your VoIP provider will be downloaded and saved on
the phone.
Please note:
The connection assistant will also start automatically if you try to establish a connection via the Inter-
net before you have made the necessary settings.
You can also call up the connection assistant at any time via the menu (page 107).
If the data for your VoIP provider is not available for download, press the ” display key twice. You
can then carry out the following steps with the connection assistant.
You must then make the settings needed for the VoIP provider using the Web configurator
(page 122). Your VoIP provider will supply you with this data.
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No Yes
Select Country
Germany
England
France
Netherlands, the
Ý OK
To Next Page
Loading...
