45
Network services
Further network services for fixed line networks
Gigaset C470IP / GRC eng / A31008-M1916-T101-2-8U19 / netservices_SAG.fm / 20.12.07
Version 2.1, 08.01.2007
Functions during a call
Consultation call
During a call:
§Ext.Call§ Press the display key.
~ Enter a number or copy it from the directory and press §OK§.
The number will be dialled via the fixed line connection.
You have the following options:
u Toggling:
¤ Use q to toggle between the participants.
– End call with active participant:
§Options§ End Active Call.
u Conference call:
– Call both participants: press the display key
§Conf.§.
– End the conference call (toggling): press display key
§EndConf§.
– End call with both participants: press the end call key a.
Accepting a waiting call
Precondition: Call waiting is activated (page 44).
§Accept§ Press the display key.
Or: if the caller's number is not transferred:
§Options§ ¢ Accept waiting call
You have the option of toggling or holding a conference call.
Rejecting a waiting call
§Options§ ¢ Reject waiting call
Please note:
After a few seconds, the number selected for a consultation call is saved in the last number redial list.
Please note:
– Without CLIP, a waiting call is only announced with a signal tone.
– If the first call was an internal call, the internal connection is ended.
– An internal call waiting is shown on the display. You can neither accept the internal call nor reject
it.
To Next Page
Loading...
