26
Handset settings
Gigaset S68H / IM-MEA / A31008-M1950-A601-1-3T19 / main.fm / 1.10.08
Version 4, 16.09.2005
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
v
¢ í ¢ Data Transfer ¢ Bluetooth
¢ Search Headset / Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
§Options§ Press the display key.
Trust Device Select and press §OK§.
~ Enter the PIN for the Bluetooth
device you want to register
and press
§OK§.
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
§Cancel§ Press the display key.
Repeat search if necessary:
§Options Select and press §OK§.
Repeat Search
Select and press
§OK§.
Editing the list of known (trusted)
devices
Open list
v ¢ í ¢ Data Transfer ¢ Bluetooth
¢ Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Viewing entries
Open list ¢ s(select entry)
§Options§ Press the display key.
View Entry Select and press §OK§.
Device name and address are
displayed.
Back with
§OK§.
Deregistering a Bluetooth device
Open list ¢ s(select entry)
§Options§ Press the display key.
Delete Entry Select and press §OK§.
a Back: press and hold key.
Changing the name of a Bluetooth device
Open list ¢ s(select entry)
§Options§ Press the display key.
Rename Select and press §OK§.
~ Change name
Save Press the display key
a Back: Press and hold key.
Please note:
– If you register a headset, any headset that is
already registered will be overwritten.
– If you would like to use a headset with your
handset that is already registered to
another device (e.g. to a mobile phone),
please deactivate this connection before
you start the registration process to the
Gigaset.
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data device
Please note:
If you deregister an activated Bluetooth device,
it may try to reconnect as an "unregistered
device".