Siemens iQ300 KG55N Series - Switching off the Appliance; Setting the Temperature; 8 Additional Functions; Super Cooling

Additional functions en
17
– Load capacity
– Temperature of newly stored
food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appli-
ance
▶ Disconnect the appliance from the
power supply. Unplug the appli-
ance from the mains or switch off
the circuit breaker in the fuse box.
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶ Press the temperature setting but-
ton (refrigerator compartment) re-
peatedly until the temperature dis-
play (refrigerator compartment)
shows the required temperature
setting.
To reach the set temperature, slide
the temperature controller for the
storage container to a position that
is one third from the bottom.
→Page17
The recommended temperature in
the refrigerator compartment is
4°C.
Setting the storage container
temperature
1. To reduce the temperature, slide
the temperature controller in the
direction.
2. To increase the temperature, slide
the temperature controller in the
direction.
Setting the freezer compartment
temperature
▶ Press the temperature setting but-
ton (freezer compartment) re-
peatedly until the temperature dis-
play (freezer compartment) shows
the required temperature setting.
The recommended temperature in
the freezer compartment is
−18°C.
Additional functions
8 Additional functions
Additional functions
Find out which additional functions
can be used for your appliance.
8.1 Super cooling
With Super cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Super cooling before pla-
cing large quantities of food in the re-
frigerator compartment.
Note:When Super cooling is
switched on, increased noise may
occur.
Switching on Super cooling
▶ Press the temperature setting but-
ton (refrigerator compartment) re-
peatedly until "super"(Refrigerator
compartment) lights up.