Siemens iQ300 KG76N Series - Initial Setup and Appliance Familiarization; First-Time Appliance Preparation; Electricity Supply Connection; Appliance Overview

Familiarising yourself with your appliance en
39
4.4 Preparing the appliance
for the first time
1. Remove the informative material.
2. Remove the protective foil and
transit bolts, e.g. remove the ad-
hesive strips and carton.
3. Clean the appliance for the first
time. →Page47
4.5 Connecting the appliance
to the electricity supply
1. Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. →Fig.
1
/
5
2. Check the mains plug is inserted
properly.
a The appliance is now ready for
use.
5 Familiarising yourself
with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→Fig.
1
A
Refrigerator compartment
→Page44
B
Freezer compartment
→Page45
1
Control panel
2
Lighting
3
Interior ventilation opening
4
Temperature controller (stor-
age container) →Page42
5
Rating plate →Page53
6
Storage container
→Page40
7
Fruit and vegetable container
with humidity control
→Page40
8
Frozen food container
→Page47
9
Screw foot
10
Butter and cheese compart-
ment →Page41
11
Door storage compartment
for large bottles →Page41
Note:Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.
5.2 Control panel
You can use the control panel to con-
figure all functions of your appliance
and to obtain information about the
operating status.
→Fig.
2
1
lights up when the alarm
is switched on.
2
The temperature setting but-
ton (refrigerator compartment)
sets the temperature of the
refrigerator compartment.
3
(Refrigerator compart-
ment) lights up when Super
cooling is switched on.
4
Displays the set temperature
for the refrigerator compart-
ment in°C.
5
(Refrigerator compart-
ment) lights up when the en-
ergy-saving mode in the refri-
gerator compartment is
switched on.