Siemens iQ500 K72L Series - 8.2 Automatic Door-Opening Aid

Additional functions en
17
8.2 Automatic door-opening
aid
The automatic door-opening aid sup-
ports you in opening the door.
Opening the door using the
automatic door-opening aid
ATTENTION!
Repeatedly closing the door prema-
turely may cause the automatic door-
opening aid to fail or wear out. Never
close the door while the door-open-
ing aid is extended.
▶ If you have nevertheless closed
the door, leave it closed for
5minutes. The automatic door-
opening aid is realigned.
1. Push the door in the middle.
a The automatic door-opening aid
extends and opens the door
slightly.
2. Manually open the door.
If you do not open the door any
further within 3seconds, the auto-
matic door-opening aid retracts
and the door closes.
Setting the compressive force of
the automatic door-opening aid
The compressive force is the force
that you must apply in order to trig-
ger the automatic door-opening aid.
1. Open the door, wait until the auto-
matic door-opening aid is retrac-
ted, and close the door.
2. Open the door and press and hold
for 2seconds.
3. Press ⁠/ repeatedly until the re-
quired compressive force is dis-
played.
Low compress-
ive force
Medium com-
pressive force
High compress-
ive force
a The compressive force of the auto-
matic door-opening aid is set and
the temperature that was previ-
ously set is displayed.
Switching off the automatic door-
opening aid
1. Open the door, wait until the auto-
matic door-opening aid is retrac-
ted, and close the door.
2. Open the door and press and hold
for 2seconds.
3. Press repeatedly until the tem-
perature display shows ⁠.
a Automatic door opening is
switched off and the temperature
that was previously set is dis-
played again.
Switching on the automatic door-
opening aid
1. Open the door, wait until the auto-
matic door-opening aid is retrac-
ted, and close the door.
2. Open the door and press and hold
for 2seconds.
3. Press repeatedly until the tem-
perature display shows the re-
quired compressive force.
→"Setting the compressive force
of the automatic door-opening
aid", Page17
a The automatic door-opening aid is
switched on with the appropriate
compressive force and the temper-
ature display shows the temperat-
ure that was previously set.