Siemens iQ700 BF722 1 1I Series - Appliance Securing and Handleless Kitchens; Securing the Appliance in the Unit; Installation for Handleless Kitchens

Installation instructions en
27
3.
ATTENTION!
When opening the appliance door, the appliance
may tilt forwards.
▶ Hold the appliance in position when opening the
appliance door.
Open the appliance door slowly.
4.
Screw the appliance to the unit on the opposite side
to the hinges.
5.
Pre-drill the screw holes in the unit on the side with
the hinges.
Cover the door hinges.
Use a wood drill with a 2 mm diameter.
6.
Remove any shavings from the cooking compart-
ment.
7.
Screw the appliance to the unit on the side with the
hinges.
8.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
18.8 For handleless kitchens with vertical
bar handle strips:
1.
Attach a suitable filling piece on both sides in order
to cover any sharp edges and to guarantee safe in-
stallation.
2.
Secure the filling piece to the unit.
3.
Pre-drill the filling piece and the unit to establish a
screw connection.