Set up and connect
¡Hot food and drinks first
Allow to cool, then place in the
appliance.
¡To avoid the cold of the deep-
To use frozen products, place them in the
refrigerator compartment for defrosting. ¡
Always leave some space between the
supplies and the back wall.
4.2
Criteria for the installation
location
WARNING
Risk of explosion!
If the appliance is located in a space
that is too small, a flammable gas/air
mixture may arise if
there is a leak in
the cooling circuit.
▶ Only install the device in a room
with a volume of at least 1 m3per 8
g of refrigerant. The amount of
refrigerant is stated on the type
4 Setup and connection
4.1
Scope of delivery
After
unpacking, check all parts for
transport damage and the
completeness of the delivery.
If you have any complaints, please contact your
dealer or our service
department →
Page 30
contact
on.
picture.
→ "Device", Fig.
/ ,
Page 14
1
5
The
weight of the device can be up to
120 depending on the model.
The surface must be stable enough to
support the weight of the device.
The delivery
consists of: ¡
Freestanding device
¡Equipment and accessories
1
¡
Assembly instructions
¡
Instructions
¡
Customer service overview ¡
Warranty
Appendix2
¡
Energy label
¡Information about
energy consumption and
sounds
Permissible
room temperature
The
permitted room temperature
depends on the climate class of the
device.
The climate class can be found on the type
picture.
→ "Device", Fig.
Page 14
1 /
5
,
Climate-
class
Allowed space-
temperature
S.N
N
ST
T
10 °C…32 °C
16 °C…32 °C
16 °C…38 °C
16 °C…43 °C
The device
is fully functional within
the permitted indoor temperature.
1
Depending on the device version. Not
in
all countries
2
11
To Next Page
Loading...
