EasyManua.ls Logo

Siemens KI87SAF30 - Controlling Appliance Functions; Switching Off and Disconnecting; Setting Compartment Temperatures; Super Cooling Mode Operation

Siemens KI87SAF30
118 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating the appliance en
33
Switching off and
disconnecting the appliance
Switching off the appliance
Press the D button.
The appliance no longer cools.
Disconnecting the appliance
If you do not use the appliance for
a prolonged period:
1. Press the D button.
The appliance no longer cools.
2. Pull out the mains plug or switch
off the fuse.
3. Clean the appliance.
4. Leave the appliance open.
Setting the temperature
Recommended temperature
Refrigerator compartment
Keep pressing the button –/+ until
the display indicates the required
temperature.
Freezer compartment
Keep pressing the button –/+ until
the display indicates the required
temperature.
Sticker OK
(not all models)
You can use sticker OK to check
whether the temperature in the
refrigerator compartment reaches
+4 °C or lower.
If the sticker does not indicate OK,
gradually reduce temperature.
When the appliance is switched on, it
may take up to 12 hours until the set
temperature is reached.
Correct setting
Super cooling
Super cooling cools the refrigerator
compartment as cold as possible.
Switch on super cooling mode, e.g.:
before placing large quantities of
food in the compartment
for cooling drinks quickly
Note: When super cooling is switched
on, increased operating noises may
occur.
After 15 hours the appliance switches to
normal operation.
Switching Super cooling on/off:
Press the super button.
The button is lit when Super cooling
is switched on.
Refrigerator compartment: +4 °C
Freezer compartment: –18 °C

Table of Contents

Related product manuals