Siemens LR97CAQ50B User Manual

HomeConnect en
9
‒ To set circulating-air mode (non-regenerable fil-
ter), press ⁠/ until LED2 lights up in the LED
display.
‒ To set circulating-air mode (non-regenerable fil-
ter), press ⁠/ until LED3 lights up in the LED
display.
‒ To convert the electronic control back to opera-
tion without the air recirculation filter, press ⁠/
until LED1 lights up on the LED display.
2.
To save the setting, press and hold ⁠and ⁠for ap-
prox. three seconds.
Or wait approx. 10seconds until the setting is
saved automatically.
To cancel the setting, press ⁠.
a A signal tone sounds as soon as the selected set-
ting is saved.
7.15 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Requirements
¡ After the appliance has been switched off, LED1
flashes in the LED display for the grease filter satura-
tion display and/or LED2 flashes for the saturation
indicator for the odour filter.
¡ A signal sounds repeatedly.
▶
Press .
a The saturation indicator is reset.
7.16 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press ⁠.
7.17 Setting the brightness
▶
Press and hold ⁠or ⁠.
Note:Colour temperature settings are available in the
HomeConnect app provided the appliance has this
function.
7.18 Switching on the button tone
The button tones can be switched on.
Requirement:The appliance is switched off.
1.
Press and hold ⁠and ⁠for approx.three seconds.
a In the LED display, the LED for the setting that is
currently selected lights up.
2.
Press ⁠or ⁠until LED1 lights up in the LED dis-
play.
To cancel the setting, press ⁠.
3.
To save the setting, press and hold ⁠and for ap-
prox. threeseconds.
Or wait approx. 10seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
7.19 Switching the button tone off
The button tones can be switched off.
Note:Signal tones for the appliance are always
switched on and cannot be switched off.
Requirement:The appliance is switched off.
1.
Press and hold ⁠and ⁠for approx.three seconds.
a In the LED display, the LED for the setting that is
currently selected lights up.
2.
Press ⁠or ⁠until LED2 lights up in the LED dis-
play.
To cancel the setting, press ⁠.
3.
To save the setting, press and hold ⁠and for ap-
prox. threeseconds.
Or wait approx. 10seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
8 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
If the appliance is not connected to your home net-
work, it functions as an appliance with no network con-
nection and can still be operated via the display.
Tips
¡
Please consult the documents supplied by
HomeConnect.
¡ Please also follow the instructions in the HomeCon-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2

Siemens LR97CAQ50B Specifications

General

Brand	Siemens
Model	LR97CAQ50B
Category	Fan
Language	English