2/11
Smart Infrastructure CC1N7219en
10/28/2020
Warning notes
To avoid personal injury or damage to property or the environment, the following
warning notes must be observed.
Interventions and changes are strictly forbidden.
Siemens does not assume responsibility for damage resulting from unauthorized
interventions.
All activities (mounting, installation, service work, etc.) must be performed by
qualified staff
The WLAN stick is designed as a temporary maintenance solution and is not
intended for continuous operation
To ensure safe and reliable operation of the unit, the following points must also be
observed:
Avoid condensation and damp environments.
If such conditions do occur, ensure that the POL903.00/100 is completely dry
before reconnecting the power supply.
Electrostatic charges must be avoided since they can damage the electronic
components of the POL903.00/100 on contact
The WLAN stick is only intended for use with the controllers listed in this data sheet
and is not designed to function as a standard WLAN stick for a standard PC
When using the
WLAN stick in an environment with strong vibrations, it is essential
to ensure that the mechanical connection to the USB interface is not interrupted
(for example, through the use of a connecting cable)
Warning!
Use with controllers!
When using with controllers that do not have protective housing or with
controllers that have a galvanic connection to the mains, there is a risk of
electric shock.
To Next Page
Loading...
