Siemens Building Technologies CE1B2540en 74 319 0616 0 b 18.07.2008 21/32
You want to query the d.h.w. temperature or
readjust the d.h.w. setpoint
(Only RVL481, RVL482)
To select lines: Press and
To readjust values: Press and
• Set the NORMAL d.h.w. temperature setpoint on line
. The standard setting is 55 °C
• Query the current d.h.w. temperature on line
• Set the REDUCED d.h.w. temperature setpoint on line
.
This setpoint is used during the OFF periods of the
selected program. The standard setting is 40 °C
To leave the setting level: Select the required operating
mode.
Excessive d.h.w. temperatures increase the risk of
scalding and produce more scale!
To Next Page
Loading...
