Siemens Building Technologies CE1B2540en 74 319 0616 0 b 18.07.2008 23/32
To select lines: Press and
To readjust values: Press and
1. On line , select the weekday whose times you want
to change:
1 = Monday, 2 = Tuesday, etc.
1-7 = all weekdays
2. On lines and , set the times required for the start
and the end of the 1st ON period.
3. On lines and , set the times required for the start
and the end of the 2nd ON period.
4. On lines and , set the times required for the start
and the end of the 3rd ON period.
To cancel an ON period, change line , or until
--:-- appears.
To leave the setting level: Select the required operating
mode.
To Next Page
Loading...
