CA2N1644en_05
02.08.2010
Building Technologies
1
644
DESIGO™ RX
Receiver with
PPS2 interface
RXZ90.1
for use in conjunction with wireless room units QAX90.1/ QAX91.1, with
– devices of the ranges DESIGO RXC, RXB, RXL, and RXA (PPS2)
– DESIGO PX Automation stations
– devices with a PPS2 or PPS interface
• Wireless acquisition of room temperature and setpoint adjustments
• For use only in conjunction with the QAX90.1/QAX91.1 wireless room units
(data sheet CA2N1643)
• Determines the average room temperature from several room units
• PPS2 interface to controller, may be changed to PPS
• Socket for commissioning and service tool, diagnostic plug or service terminal
Use
The RXZ90.1 is used for wireless reception of the room temperature (from the
QAX90.1) and the room temperature setpoint (from the QAX91.1), and for transmission
of this information to a room controller. Wireless range indoors: approx. 30m.
Types
RXZ90.1
Receiver with PPS2 interface
To Next Page
Need help?
General