EasyManua.ls Logo

Siemens S6 Power - Battery Specification; Short Circuit Protection

Siemens S6 Power
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Private Communication Systems
Mobile Phones
The standard S6 Power battery is a NiMH (Nickle Metal Hydride)
type with a voltage of 3.6 Volts and a capacity of 700 mAh.
As an accessory, also an extended NiMH with 1500 mAh is
available.
The Li-Ion battery of the S6 GSM/PCN with a capacity of 1000 mAh
can be used.
The connections BATT+ and GND are used to supply the mobile, while RCODE is
used to detect the battery technology. BATT_TEMP is used to measure the battery
temperature.
Short Circuit Protection
The battery is short-circuit protected by an electronic fuse.
The resetting of the fuse can be done by the following procedures:
V1.2 Page 17 of 18 PN MP ST
D. Schnoor
4/98

Related product manuals