Private Communication Systems
Mobile Phones
The keypad (1030), the loudspeaker (1120), the microphone (1110), the dust
protection frame (1075) and the display window (1070) are mounted into the upper
case shell (1040). Make sure that the microphone contacts are properly bent up
when mounting.
When turning in the screws (1140, 1145 and 1150) make sure that the right torque is
used (25 Ncm), because this will have an effect on the contacts of the
interconnector.
V1.2 Page 4 of 18 PN MP ST
D. Schnoor
4/98
To Next Page
Loading...
Need help?
General
