Preface
SCALANCE X-300
Operating Instructions, 02/2012, A5E01113043-12
5
Further documentation
For help on configuration and diagnostics using Web-based management, the CLI command
line interface, or SNMP, refer to the following documentation:
● Configuration Manual SCALANCE X-300 SCALANCE X-400
This configuration manual is available on the following media:
– On the supplied CD
– In 5 languages on the Internet on the pages of Siemens Automation Customer
Support under the following entry ID:
19625108 (http://support.automation.siemens.
com/WW/view/en/19625108)
● SIMATIC NET - Twisted Pair and Fiber Optic Networks
This manual is available on the following media:
– On paper under order numbers:
- English version: 6GK1 970-1BA10-0AA1
- German version: 6GK1 970-1BA10-0AA0
– In 5 languages on the Internet on the pages of Siemens Automation Customer
Support under the following entry ID:
8763736 (http://support.automation.siemens.
com/WW/view/en/8763736)
If you have questions on the use of SIMATIC NET products, please contact your Siemens
sales partner.
Standards and approvals
The devices of the SCALANCE X-300 product line meet the requirements for the CE mark.
For more detailed information, refer to section Approvals, certificates, standards (Page 223).
Integration in STEP 7 projects
The current GSDML file must be used for integration in STEP 7 V5.4 SP5 projects. This
applies to all products covered by these operating instructions.
You can obtain the relevant GSD file from the Internet at:
46183514 (http://support.automation.siemens.
com/WW/view/en/46183514)
You will find the file for the firmware update V3.3.1 for X-300 under entry ID "46183538".
To Next Page
Loading...
Need help?
General
