To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE M-800 Series and is the answer not in the manual?
General| Product Family | SCALANCE M |
|---|---|
| Category | Network Router |
| Wireless Connectivity | No |
| Firewall | Yes |
| VPN | Yes |
| Operating Temperature | -40°C to +70°C |
| Power Supply | 24 V DC |
| Mounting | DIN Rail |
| Redundancy | Yes |
| VPN Support | IPsec |
| Security Features | DoS Protection |
| Management | Web-based, SNMP |
| Protocols Supported | DHCP, DNS |
| Certifications | CE, UL |
Explains that the manual uses examples to show SCALANCE M configuration.
Lists designations and their corresponding SCALANCE M product names.
Lists related manuals and resources for additional information on SCALANCE M products.
Provides guidance on finding SIMATIC NET manuals via Siemens Industry Online Support.
Offers recommendations for maintaining IT security with Siemens automation products.
Details connecting the SCALANCE M874 to a WAN using a mobile wireless network connection.
Covers the physical setup and network connection of the SCALANCE M874 device.
Details how to modify the IP address and subnet mask of the M874 device.
Covers setting up mobile network access parameters like PIN, APN, and user credentials.
Details firewall rule configuration for global or specific network access.
Introduces connecting SCALANCE M81x to ADSL via Web Based Management.
Details how to modify the IP address and subnet mask of the M81x device.
Covers setting up ADSL access parameters like VCI/VPI and encapsulation.
Details configuring SHDSL for higher transmission rates using a 4-wire setup.
Guides on configuring M826 devices using the Primary Setup Tool (PST) in 4-wire mode.
Describes SHDSL setup in routing mode for interconnecting different IP subnets.
Guides on configuring M826 devices using the Primary Setup Tool (PST) in routing mode.
Explains how to configure static routes for communication between different IP subnets.
Details how to set up the SCALANCE M-800 as a DHCP server for dynamic IP assignment.
Explains how to configure DHCP options like default gateway, DNS, and NTP server for clients.
Guides on assigning static IP addresses, particularly for devices like NTP servers.
Introduces the configuration of secure VPN tunnels between SCALANCE M-800 and S612.
Details the process of establishing a secure VPN tunnel using Pre-Shared Keys (PSK).
Explains how to set up a secure VPN tunnel using digital certificates for authentication.
Explains how to create firewall rules for IPsec VPN connections, both automatically and manually.
Introduces VPN tunnel configuration between SCALANCE M-800 and security CPs like CP 1628.
Details setting up a VPN tunnel using Pre-Shared Keys (PSK) with security CPs.
Explains how to establish a VPN tunnel using digital certificates with security CPs.
Introduces connecting SCALANCE M87x devices to a SINEMA RC Server via VPN tunnels.
Details steps to configure access from SCALANCE M874 to the SINEMA RC Server.
Guides on setting up remote connections and participant groups on the SINEMA RC Server.
Guides on setting up remote connections on the SCALANCE M87x device to the SINEMA RC Server.
Explains how NETMAP is used for IP address translation for local network traffic.
Describes NETMAP's role in IP address translation for traffic originating from the remote network.
Combines local and remote NETMAP rules for comprehensive IP address translation.
