Need help?Do you have a question about the Siemens SICHARGE UC 150 UL and is the answer not in the manual?
Explains the grading of warning notices (DANGER, WARNING, CAUTION, NOTICE).
Defines qualified personnel for operating the product.
Notes for proper usage and recommendations.
Mentions registered trademarks of Siemens AG.
States limitations on consistency and liability.
Equipment tested and found to comply with FCC Part 15 limits.
Requirements for keeping and using the manual correctly.
Information on open-source software used in the firmware.
Information on industrial security functions and recommendations.
Siemens' data protection principles and product's data handling.
General safety guidelines and regulations to follow.
Specifies the product's intended use for charging electric vehicles.
Requirements for personnel performing work on the dispenser.
Precautions regarding flammable liquids and ignition sources.
Protection standards and precautions against water ingress.
Security measures for device access.
Prohibition of unauthorized modifications and use of undamaged parts.
Rules for securing electrical systems before and after work.
Lists safety signs on packaging and inside the dispenser cabinet.
Siemens' approach to industrial security and product updates.
Details found on the device's nameplate and its position.
General description of the SICHARGE UC dispenser's function.
Key features of the SICHARGE UC dispenser.
Information on available versions and mounting variants.
Intended areas of use for the SICHARGE UC dispenser.
Comparison of floor mounting variants.
Comparison of wall mounting variants.
Details of the dispenser's external structure and controls.
Explains the meaning of different LED indications.
Features and adjustments of the HMI screen.
Security feature and storage for charging plug and cable.
Shows the internal components of the dispenser.
Details about the charging cable and its standard compliance.
Explains the function of each contact on the CCS1 connector.
Mechanism for securing the charging connection.
How temperature monitoring ensures safe charging.
Technical specifications of the charging cable.
Overview of protective devices within the dispenser.
How upstream charging station provides overvoltage protection.
System for monitoring and preventing overloads.
How insulation monitoring prevents ground faults.
Steps for verifying delivery contents against documents.
Lists documents and disclaimer for device use.
How to check the tilt indicator on packaging.
Visual inspection of the entire transport packaging.
Steps to remove road transport packaging.
Steps to remove air transport packaging.
Steps to remove sea transport packaging.
Procedures for documenting and reporting delivery issues.
Requirements for selecting a safe installation location.
Measures to avoid accidents and notes on corrosive environments.
Criteria for choosing a safe installation location.
Requirements for floor and wall mounting surfaces.
Required clearances for floor-mounted dispensers.
Required clearances for wall-mounted dispensers.
Limits for ambient temperature and airflow notes.
Connecting to low-voltage and direct voltage networks.
Recommendations for routing DC cables to minimize interference.
Specifications for Ethernet and fiber-optic cable routing.
Requirements for grounding and general circuit routing.
Installing a bumper for protection against vehicle impact.
Steps to prepare the floor for dispenser mounting.
Shows the position of the cable entry from below.
Importance of securing the work area.
Specifies drill hole locations for floor mounting.
Recommended fixing materials for floor mounting.
Steps to prepare the wall for dispenser mounting.
Shows cable entry positions for wall mounting.
Procedure for drilling holes and installing anchors for wall mounting.
Steps to hang the dispenser on the wall mount brackets.
Conditions for the storage location.
Risks associated with improper storage.
Considerations for storing the dispenser for extended periods.
Safety warnings and guidelines for transporting the dispenser.
Steps for transporting the dispenser using a forklift.
Lifting procedures for floor and wall mounting.
Safety guidelines for installing the SICHARGE UC dispenser.
Measures to prevent radio interference from DC cables.
Safety areas and PPE requirements for mounting.
Precautions for moving parts and cables during mounting.
Requirements for grounding the unit.
Steps for mounting the dispenser on the floor.
Procedures for lifting the dispenser off the pallet.
Tools and materials needed for floor mounting.
Detailed steps for positioning and securing the dispenser on the floor.
Procedures for mounting the dispenser to a wall.
Procedures for lifting the dispenser for wall mounting.
Tools and materials needed for wall mounting.
Detailed steps for positioning and securing the dispenser on the wall.
Safety guidelines for electrical connection.
Risks of loose power connections and tightening requirements.
Precautions for moving parts and cables during connection.
Steps for connecting the power supply cable.
Requirements for grounding and cable routing.
Steps for connecting the protective earth conductor.
Steps for connecting the L1 and N conductors.
Securing cables and looping for daisy-chaining.
Steps for connecting the DC cable.
Diagram showing DC cable connections.
Steps for connecting the protective conductor of the DC cable.
Steps for connecting DC+/DC- conductors to busbars.
Looping through DC connections for daisy-chaining.
Steps for connecting the communication cable (Ethernet/fiber-optic).
Diagram showing communication cable connection.
Detailed steps for connecting Ethernet or fiber-optic cables.
Instructions for assembling the Ethernet connector.
Cable routing considerations and fastening the cable.
Looping through Ethernet connections for daisy-chaining.
Procedure for switching on the dispenser for commissioning.
Reiterates that only qualified personnel can work on the dispenser.
Warning about electric shock risk from condensation.
Risk of injuries or damages if the charging plug is not secured.
Switching elements required for powering up the dispenser.
Describes the automatic startup process and readiness indication.
Safety guidelines for operating the SICHARGE UC dispenser.
Protective measures against accidents and falling parts.
Using only undamaged components.
Ensuring access to the emergency off button.
Safety instructions for using the charging cable.
Guidelines for operating the HMI screen safely.
Steps to plug in the charging cable to start charging.
Avoiding damage to the HMI screen with unsuitable objects.
Risks of using damaged cables or sockets.
Information on the "Start" menu for monitoring charging.
Symbols indicating vehicle and connection status.
Overview of charging steps and charge level information.
How to stop an active charging process.
Steps to unplug the charging cable after charging is complete.
Risks of forcibly removing the charging plug.
How alarms are displayed on the HMI screen.
Steps to navigate to the Alarms History menu.
Display of recorded alarms with time, date, and status.
Steps to open the "Options" menu.
Procedure for checking recorded alarms.
Steps to restart charging after an alarm is deactivated.
Importance of eliminating the alarm cause before deactivation.
Accessing and displaying dispenser information.
Displays voltage and current values of the charging station.
Table listing values displayed on the HMI screen.
Accessing energy meter information for the last session.
Accessing the display for charging voltage and current trends.
Accessing advanced settings and controls.
Allows changing limits on output power, voltage, and current.
Interface for manual control of dispenser functions.
Explanation of the two-stage charging process.
Rules for queue processing and charging prioritization.
Illustrates a sequential charging scenario with multiple dispensers.
General overview of alarm diagnostics and messages.
Alarm message for emergency stop activation.
Describes the state and procedure to cancel the emergency off function.
Alarm message displayed when a cabinet door is opened.
Alarm message for ground fault detection.
Procedure to cancel alarm state by disconnecting the vehicle.
Data displayed for each alarm in the history.
Lists alarm messages and error handling steps.
Safety guidelines for maintenance and service.
Warnings about falling parts and keeping work area clean.
Precautions for parts and creating safety areas.
PPE requirements and risks of foreign objects.
Overview of maintenance measures and intervals.
Tests to be performed on the exterior of the station.
Maintenance interval and visual check items for the exterior.
Checking the fan for unusual noises.
Maintenance interval and checks for the interior of the dispenser.
How to clean the HMI screen properly.
Guidelines for cleaning the dispenser cabinet and cable.
How to clean ventilation grilles to ensure cooling.
Recommendations for environmentally friendly packaging disposal.
Guidance on environmentally friendly disposal of the dispenser.
Recommended treatment for key dispenser components.
Contact information and business hours for customer support.
Instructions for submitting a support ticket online.
Detailed technical specifications of the SICHARGE UC dispenser.
Input voltage and frequency specifications.
Rated power, current, and voltage range for DC output.
Specifications for ambient conditions, cabinet, weight, and cables.
Table detailing connection types and cable specifications.
Information on charging current progression based on voltage.
Figure illustrating power curve depending on charging voltage.
Statement of compliance with UL standards for charging stations.
Lists directives met by the dispenser.
List of abbreviations used in the instructions.
To Next Page
General