EasyManua.ls Logo

Siemens Silver WD7205 - Water connection

Siemens Silver WD7205
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
max.100cmmax.100cm
max.100cmmax.100cm
110cm
~
~
100cm
~
~
1
10cm
~
~
150cm
~
~
140cm
~
~
1
50
c
m
~
~
45
Hose and cable lengths
Left-hand connection
Right-hand connection
Caution:
In order to avoid siphon, do not put the outlet hose into a
container with water.
Water connection
Water supply
For the water connection a standard cold-water line
with a minimum water pressure of 0.1MPa is required
(with tap full ON, at least 8 litres of water must flow
out in one minute). If the water pressure exceeds
1MPa, a pressure reducing valve must be added.
Never connect the machine to the mixer tap of a
pressureless hot-water heater.
Caution! Connections are under full water
pressure, check for leaks with tap turned fully ON.

Related product manuals