Siemens SIWAMAT XT 1050 - Spin Speed Settings and Controls

21
Rinsing
Separate rinsing cycle with subsequent spin cycle for
easyĆcare fabrics.
Spin 4
Separate spin cycle. Washing solution or rinsing water
is drained prior to the spin cycle.
Pumping
Draining of the rinsing water after a wash programme
with the 5 Rinse hold" setting for the gentle
treatment of delicate laundry.
Basic setting
(Spin speed selector pointing upward)
In the Cottons/coloureds", EasyĆcare" and Wool"
programmes the fabrics will be spun at the maximum
possible spin speed.
In the Delicate" programme a lower spin speed will
automatically be used, regardless of the position of
the spin speed selector - for the gently washing of the
laundry.
Revolutions
per minute
XT 750
Revolutions
per minute
XT 1050
Revolutions
per minute
XT 1250
Type of laundry /
Extra cycle
750 1000 1200 Cottons/coloureds
750 800 800 EasyĆcare
600 600 600 Delicate
750 800 800 Wool
750 800 800 Rinsing
750 800 800 Spin 

Washing remains in the last rinsing water.
Start the "Pumping" or "Spin " programme.
The washing can also be removed dripping wet.
Set the programme selector to "Off" and wait
approx. 2 minutes.
Extra cycle
programme selector
Spin speed selector
Maximum spin speeds
Additional function
spin speed selector