When the Programme has Ended
The End" control light comes on.
q Turn the programme selector to Off",
and, where required:
q Select a programme option (Pumping", Spin "
or Rinsing").
q Press the 3" button.
q At the end of the programme option, turn the
programme selector to Off".
q Turn off the water tap.
(If appliance features AquaĆStop, turn off tap only if
house is empty for a prolonged period)
q Open the appliance lid and drum lid.
If the loading door cannot be opened:
Wait for 2 minutes (the safety function is active)
or
there is still water in the washing machine if the "
option was selected.
In this latter case, select the Pumping" or Spin "
programme.
q Unload the laundry.
Caution
Remove any debris (e.g. coins, paper clips) from the
drum and rubber seal - risk of rust formation!
q Leave the lid open so that the inside of the
washing machine can dry out.
Unloading
the laundry
To Next Page
Loading...
